Basic Info.
Usage
Interactive Whiteboard
Support Network
Bluetooth
Product Description
Product title: Tallpic Interactive Module
Product description:
1. What is Tallpic Interactive Module?
Tallpic Interactive Module can be built into any projector to turn it into an interactive projector,
so as to realize interactive functions. For example, teachers or presenters can write, annotate,
and highlight important contents of PPT on any projection surface.
Tallpic Interactive Module is small in size and flexible in installation. Our technical team can
design the best structural accessories according to different internal structures of projectors.
2. Tallpic Interactive Module features 1. The only known pure-hardware solution for camera-based interactive technology.
2. Zero computer resource consumption, runs well on low-end systems.
3. Plug-and-play, no software needed.
4. Supports all known OS systems: Windows, Android, Linux, OSX, etc.
5. 940nm IR and advanced optical technology, works well in bright rooms.
6. Very small size camera (8x8x6mm for long focus products) and flexible module design
support.
7. 4-point calibration for all products.
3.Specifications Tallpic Interactive Module |
Model | MD-MPLT | MD-MPST | MD-MPVST |
Focal length types | Long focus | Short focus | Very-short focus |
Receiving angle | 45~60° | 60~90° | 90~120° |
Signal source | 940nm infrared |
Effective receiving area | 120 inch |
Communication interface | USB |
Calibration method | 4-point fast sampling |
Multi-touch | 5 points |
Resolution | 2000×1500 |
Time delay | 25ms typical |
Power consumption | <0.5W |
Installation support | Single laser center indication |
Volume | 110x85x46mm |
Weight | 118g |
Infrared pen |
Model | P21SC |
Signal source | 850nm/940nm infrared |
Nib trigger mode | Omni-directional pressure trigger |
Lateral sensitivity | < 50g |
Dynamic sensitivity | <0.8mm |
Power source | Supper capacitor |
Charging method | Micro USB |
Charging voltage range | 4.5V~5.5V |
Charging time | ≤4 minutes |
Rechargeable times | No limit |
Full power run time | 1.5 hours for normal use |
Charge retention time | 72 hours |
Nib trigger life circle | >1 million |
Volume | Length 14cm ;Diameter 15mm |
Weight | 25g |
5.FQAQ:Do I need to do calibration every time I start the device?
A:For the first time using, calibration is needed. You do not need to do it later if there is no positional movement between the device and the display. Q:Why is the MaxPro plug-and-play?
A:Unlike other similar products, the MaxPro has processing chips inside. It performs image processing, position calibration and touch handling with Tallpic's efficient algorithm on board. This allows the MaxPro to perform as a standard USB HID multi-touch device. Q:Why is Tallpic's Plug-and-Play products more smooth and quick?
A:Compared with the normal USB camera based software solutions, Tallpic's pure hardware interative product such as MaxPro/TVT, are free from image transfer delay, image compression/decompression delay and loss,etc. Q:What operating systems does the MaxPro support? Why my Android system can't work with MaxPro?
A:In principle, any operating system that supports standard USB multi-touch devices can be used with Maxpro. For example, Windows,MaxOS, Linux, Android. But In some Android products, some necessary components/files are removed to simplify the system.This makes it not capable to recognize MaxPro. Usually an Android engineer can easily solve the problem. Q:My USB cable is not long enough, what can I do?
A:Normally an USB cable can not be more than 5m. If you need longer USB cable, you can choose an USB active repeater cable. Or you can choose the wireless model of MaxPro. Q:How to choose among the models of MaxPro?
A:If you will install it on a projector, MaxPro-VST is suitable for the very-short throw projector, MaxPro-ST is suitable for the short throw projector, MaxPro-LT is suitable for the long focus projector. However, the MaxPro can be installed independently from the projector. Thus MaxPro is not restricted by the projector type. Q:Why there is a position shift when writing?
A:There are several possible reasons: 1.If the whiteboard is not flat, the position of the convex and concave portion will deviate. 2.The position of the pen was not accurate when doing calibration. 3.The display area is not complete especially when the computer is connected to the projector or LCD through a VGA cable, please check the display. Q:Can I use the product when there is strong light?
A:This product is for indoor use. If the sunlight directly shines at the screen, it may interfere with the reception of the pen signal. Thus the device can not work. Q:Why a lot of incorrect touch noise appear when a LiDAR camera or mobile phone with LiDAR is close?
A:Because most LiDAR products emit 940nm laser.It's a strong noise source to our sensor.
Q:What are the advantages of Tallpic's infrared pens?
A:1)Tallpic's infrared pen(P20B,P21SC, etc.) are all-direction pressure sensitive other than axial sensitive. While most other known products are only axial pressure triggered, they are difficult to be triggered in some cases.
2)Most of Tallpic's infrared pen uses super capacitor as electrical energy storage device. Its special advantages are: No battery pollution; No material cost; Unlimited charging life cycle; Fast charging and no worry for the battery's suddenly running out; Light weight and not subject to air transport restrictions.6.Our Service:Warranty:The signal receiver is guaranteed for three years.
Under warranty,if any non-human damage happen, we'll offer free repairing or replacement, including delivery cost.
Out of warranty: we offer repairing parts at lower cost, and service free in charge.
7.Company Information:
8.Certificates:
CE for TV-Toucher
Other certificates
Contact Us:
Address: 3F-B BLD-2, R&D ZONE 1, XUZHUANG SOFTWARE INDUSTRY BASE , XUANWU ROAD 699-8,NANJING CHINA
Website: tallpic.en.made-in-china.com
Address:
Building 17, 1# Jishan Avenue, Jiangning District, Nanjing, Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company, Group Corporation
Business Range:
Computer Products, Consumer Electronics, Electrical & Electronics, Office Supplies
Management System Certification:
ISO 9001
Company Introduction:
Powerful interactive presentation anywhere any time!
Tallpic Intelligence Technology Ltd. Is the professional high-tech enterprise with focus on human-computer interactive technology. We are pioneer in the image tracking whiteboard industry with more than 10 years in interactive whiteboard development and manufacturing.
We continuously invests in R&D, with 3 invention patent certification and over 20 utility model patent in the area of interactive whiteboard.
ONfinity interactive whiteboard certified with CE, RoHS, FCC, step into more than 40 countries and areas in different industries. And annual sales volume has grown rapidly by more than 30% worldwide, which improves our international competitiveness.
The main products as follows: The first Portable interactive whiteboard, the first Ultra-short throw portable IWB in the world. Our principle is: Reliable quilty and Reasonable Price, Remarkable Service.
Our latest invention, the Time Division Multi-Pen system(TDMP system), and relative products, will again establish our leading position in interactive whiteboard industry.